HYDRA THROTTLE VALVES

Hydroplex Hydra series throttle valves are Multi Orifice Valves (MOV) specifically designed to control high-pressure liquids and gases while providing reliability and extended service. The Hydra throttle valve’s innovative modular design means that the valve body is not sacrificed during normal service, thanks to the replaceable downstream hub. It also allows for multiple-stage pressure drops within ONE valve. The design flexibility allows for field conversions from manual to automated, and single-stage to multistage pressure drops. Our HCA, HCY, and CSX models allow for direct mounting of most female drive actuators with NO need for brackets or adapters. See our Hydra Valve Brochure for more information and contact us to help customize your Hydra throttle valve today.

Hydroplex also manufactures a selection of high-pressure regulators, check valves, and bleed valves giving the operator precise control during high-pressure hydrostatic testing. With design pressures up to 30,000 psi, let Hydroplex match the right valve to your pump.

 

MINIMAX

  • Convertible from inline to right-angle flow.
  • Direct mounting of actuators. No lifter required.
  • Easily change internal components with minimal effort.
  • 3000 psi Maximum Working Pressure.
  • Suitable for dump or gas throttling on separators.

HYDRAMAX

  • Unique design can achieve up to a 3 stage pressure drop in the same valve.
  • Built-in 3 to 1 gear assist NOT in the flow path. Cannot be contaminated with sand or other unwanted debris.
  • Exobody is not wetted and under normal operation will never be replaced
  • Offers up to 89 Cv (124/64ths) for large flows.

HCI 

  • Unique design can achieve up to a 2 stage pressure drop in the same valve
  • Robust valve body can be used again and again. Simply replace the worn end connections
  • Easily change internal components with minimal effort
  • Valve can be serviced in place. No need to disconnect piping or actuator.

HCA 

  • Unique design can achieve up to a 3 stage pressure drop in the same valve.
  • Robust valve body can be used multiple times. Simply replace the worn-end connections.
  • Valve can be serviced in place. No need to disconnect piping or actuator.
  • Direct mounting of actuators. No brackets or couplings required.

HCY

  • Unique design can achieve up to a 3 stage pressure drop in the same valve.
  • Robust valve body can be used multiple times. Simply replace the worn-end connections.
  • Valve can be serviced in place. No need to disconnect piping or actuator.
  • Direct mounting of actuators. No brackets or couplings required.
  • Contoured wear sleeve for extended life

CSX 

  • Unique design can achieve up to a 3 stage pressure drop in the same valve.
  • Cartridge feature: pressure sensor/gauge port for service notification.
  • Valve can be serviced in place. No need to disconnect piping or actuator.
  • Direct mounting of actuators. No brackets or couplings required.

HR-20P PNEUMATICALLY CONTROLLED PRESSURE REGULATOR

  • Provides remote operator control of high pressure
  • Used in hydrostatic testing
  • Pressures up to 30,000 PSI
  • 220:1 Pressure ratio standard version, 80:1 high flow version

HR2-20 HAND PRESSURE REGULATOR

  • Provides operator control of high pressure
  • Quick release safety handle
  • Used in hydrostatic testing
  • Pressures up to 30,000 PSI
  • Flow Cv = .43

HIGH-PRESSURE INLINE CHECK VALVE 

  • Pressures up to 30,000 PSI
  • Custom inlet and outlet porting
  • Utilizes the HP-550 valve cartridge
  • Easily Repairable

NV-20B SERIES BLOCK VALVE 

  • Provides operator control of high pressure
  • Used as a backpressure valve or bleed-off valve
  • Pressures to 20,000 PSI